国内精品福利丝袜视频|91国在线啪精品一区|自拍区图片区小说区激情|亚洲成AV人片在线观看|囯产精品久久久久久久久久|大学生一一级毛片在线播放|久久成年片色大黄全免费网站|亚洲欧美日韩在线精品2021

application

  This design is designed to ensure the mixing and leak detection of products when two different products flow through the same valve. It is widely used in food, brewing, beverage, dairy, toothpaste cosmetics, bio-pharmaceutical and other industries.

Technical Parameters

◆Specifications: 1.5"～4" DN40～DN100

◆Connection method: welding, clamp, thread, flange

◆Maximum working pressure: ≤6bar

◆ Supply compressed air: 4-8bar

◆Compressed air connection: air pipe joint G1/8"

◆Proximity switch: 6-36V DC 2 NPN or PNP (optional)

◆ Solenoid valve: 24V DC

◆Working temperature: -10 ° C to 120 ° C

◆Contact with material: SS304/SS316L

◆Internal surface contact product: Ra≤0.8μm

◆Sealing: EPDM, Silicone Rubber (SI), Fluororubber (FPM)

working principle

The valve is normally in the normally closed (NC) state. The valve is equipped with two small pneumatic valves. Under normal conditions, it is normally open (NO). It only needs to supply compressed air to the pneumatic head to close the two small valves synchronously. The main valve core is equipped with two independent seals, and a leak detection cleaning chamber is formed between the two seals, and the leaked product can flow out from the small valve outlets on both sides, and the seal is replaced in time. During the CIP cleaning, the fluid flows to the square core of the spool, which can completely clean the main spool (the main spool has a taper), and can also make the external CIP valve insensitive to the water hammer effect. It is mainly used for fluid cut-off in pipeline systems and is used in pipeline systems.